D30 Series RF CO₂ Lasers
The D30 series RF CO₂ lasers are well-known for their high reliability, featuring a compact design that integrates the RF power supply with the laser cavity. This configuration ensures excellent beam quality and power stability.
D30 Series RF CO₂ Lasers
The D30 series RF CO₂ lasers are well-known for their high reliability, featuring a compact design that integrates the RF power supply with the laser cavity. This configuration ensures excellent beam quality and power stability. With a wavelength range of 9.3 to 10.6μm, the lasers can be configured for both air and water cooling, make it as the preferred choice for high-performance laser marking and engraving systems. In addition, it incurs minimal operating and maintenance costs.
The D30 series RF CO₂ lasers are an ideal solution for laser processing of a wide array of materials, including paper, plastic, wood, rubber, leather, and fabric etc.
Advantages:
• Excellent beam quality
• Stable power output
• Integrated design of RF power supply and laser cavity
• High reliability
• Both air and water cooling available
• Capable of high-quality laser processing on a variety of materials
Applications:
• Marking
• Engraving
• Cutting
Specifications:
| MODEL | D30i | D30 | GMIT35 | |
| Wavelength (μm) | 9.3 | 10.2 | 10.6 | 10.6 |
| Optical Output Power (W) | ≥ 25W | ≥ 35W | ≥ 40W | ≥ 38W |
| Power Stability (%) |
< ±5% |
< ±4.5% | ||
| Mode Quality (M²) |
M² < 1.3 |
M² < 1.15 | ||
| Beam Ellipticity |
< 1.2:1 |
< 1.15:1 | ||
| Beam Size (mm) | 1.8 ± 0.2 | |||
| Beam Divergence (mrad, full angle) | 7.5 ± 0.5 | |||
| Polarization | > 100:1 | |||
| Pulse Frequency (kHz) | 0 ~ 25kHz | |||
| Duty Cycle | 0 ~ 100% | |||
| Weight | 6.3kg (Fan) / 5.6kg (Water) | |||
| Dimensions (mm) | 359.2 x 92 x 140.1 (Fan) / 359.2 x 92 x 94.8 (Water) | |||
| Cooling | Fan / Water | |||
| Heat Dissipation (W) | < 600W | |||
| Input Power | ||||
| DC Input Voltage (VDC) | 48VDC | |||
| DC Input Current (A) | 12.5A | |||
| Environment Condition | ||||
| Maximum Case Temperature | < 55°C | |||
| Temperature | 5°C ~ 35°C | |||
| Altitude | < 2000m | |||
| Humidity | Non-Condensing | |||
| Shipping/Storage Environment | -10°C ~ 60°C, Non-Condensing | |||
| Coolant | ||||
| Dynamic Coolant Flow Rate (l/min) | 4L/min | |||
| Coolant Maximum Static Pressure (kPa) | 500kPa | |||
| Coolant Setpoint Temperature Range | 20°C – 30°C | |||
| Hardness of water (CaCO3) | < 250mg/L | |||
| Notes: Measured at 25°C and derated by 1%/°C for higher laser head temperatures. Power Stability definition: ±(Pmax – Pmin)/(2Pmax). Measured at constant duty cycle after 10 minutes laser out at operating condition. Measured at 10 kHz PRF and 60% duty cycle operation, maximum average input current. |
||||
